Match Lit System Connection Diagrams - Warming Trends CFBL170 NG Owner's Manual And Instruction Manual

Leave this Connection Diagram with end user.

MATCH LIT SYSTEM CONNECTION DIAGRAMS

249K BTU Systems and below
1. Locate FK1
Parts include Whistle-Free Flex Line, key valve, escutcheon
plate, and keys.
STEP 1 - FIT180
3" Key
Escutcheon Key Valve
2. Remove Flared Fittings from Whistle-Free Flex Line
Removing flared fittings first makes installation easier.
Thread
sealant is
applied
to this
end only
throughout
instructions
Flared Fitting
3. Connect to 1/2" x 2" Nipple, then to Coupling
(FK1) Connect one 3/4" Flared Fitting removed in Step 2 to
STEP 3
1/2" x 2" Nipple fitting provided by inserting 1/2" x 2" Nipple
into interior threads of the Flared Fitting. Tighten.
Use inside threads
of Flared Fitting
½" x 2"
Nipple
Apply thread sealant here
Then, connect the
½" x 2" Nipple
fitting into the
coupling located
on the bottom
Apply thread
of the aluminum
sealant here
plate. Tighten.
10
12" Key
½" x 2" Nipple
Flared End
3/4" Flared Fitting
Coupling
½" x 2" Nipple
Plate
3/4" Flared
Fitting
www.Warming-Trends.com | 303 346 2224 | orders@warming-trends.com
Whistle-Free Flex Line
Whistle-Free Flex Line
Flared
Fitting