Volt Electronic Ignition System Connection Diagrams - Warming Trends CFBL170 NG Owner's Manual And Instruction Manual

24 VOLT ELECTRONIC IGNITION SYSTEM
CONNECTION DIAGRAMS
249K BTU Systems and below
1. Locate FK1
Parts include Whistle-Free Flex Line, key valve, escutcheon
plate, keys.
STEP 1 - FIT180
3" Key
Escutcheon Key Valve
2. Remove Flared Fittings from Whistle-Free Flex Lines
Removing flared fittings first makes attaching to
½" x 2" Nipple.
Thread
sealant is
applied
to this
end only
throughout
Flared Fitting
instructions
3. Connect to Coupling
(FK1) Connect one 1/2" Flared Fitting
removed in Step 2 to 1/2" x 2" Nipple fitting
STEP 3
provided by inserting 1/2" x 2" Nipple into
interior threads of the Flared Fitting. Tighten.
Use inside threads
of Flared Fitting
½" x 2"
Nipple
Apply thread sealant here
Then, connect the 1/2" x 2" Nipple fitting to Gas Valve.
Coupling
Drip 24 Volt Ignition
Leg
14
12" Key
½" x 2" Nipple
Flared End
3/4" Flared Fitting
Plate
Flared Fitting
Apply thread
sealant here
www.Warming-Trends.com | 303 346 2224 | orders@warming-trends.com
Whistle-Free Flex Line
Whistle-Free Flex Line
Flared
Fitting