Tool Specifications - Jet JAT-322 Operations & Parts Manual

Tool specifications

Model number
Stock number
Square drive
Bolt capacity
Anvil retainer type
Impact mechanism
Maximum torque
Working torque
Free speed
Average air consumption
Air inlet
Air hose inside diameter
Required air pressure
Vibration value
1
Noise level
Power setting
Grip
Overall Length
Housing material
Net weight
Shipping weight
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
6 JAT-322,323 Ratchet Wrenches
JAT-322
505322
3/8 in.
1/2 in.
Ball detent
Single hammer
100 lbf•ft (135.58 N•m)
25-70 lbf•ft (33.9-94.91 N•m)
600 RPM
4 CFM
1/4 in. NPT
3/8 in.
90 psi (621 kPa)
2
10.45 m/s
107 dB(A)
variable, forward and reverse
Inline
11.5 in. (292.1 mm)
Aluminum with rubber grip
3.97 lb. (1.80 kg)
3.99 lb. (1.81 kg)
JAT-323
505323
1/2 in.
1/2 in.
Ball detent
Single hammer
100 lbf•ft (135.58 N•m)
25-70 lbf•ft (33.9-94.91 N•m)
600 RPM
4 CFM
1/4 in. NPT
3/8 in.
90 psi (621 kPa)
2
18.28 m/s
106 dB(A)
variable, forward and reverse
Inline
11.5 in. (292.1 mm)
Aluminum with rubber grip
3.97 lb. (1.80 kg)
3.99 lb. (1.81 kg)