netvox R718IB2 User Manual page 7

Example of ConfigureCmd
Description Device CmdID
Config
0x01
ReportReq
Config
0x81
ReportRsp
R718
IB2
ReadConfig
0x02
ReportReq
ReadConfig
0x82
ReportRsp
(1) Configure R718IB2 device parameter MinTime = 1min, MaxTime = 1min, BatteryChange = 0.1v, ADC Raw Value Change=100mV
Downlink: 0142003C003C0100640000
Device Return:
8142000000000000000000 (configuration success)
8142010000000000000000 (configuration failure)
(2) Read R718IB2 device parameter
Downlink: 0242000000000000000000
Device Return:
8242003C003C0100640000 (device current parameter)
Example for MinTime/MaxTime logic:
Example#1 based on MinTime = 1 Hour, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange=0.1V
MaxTime
Sleeping(MinTime)
Wakes up and collects data
REPORTS 3.6V
Note: MaxTime=MinTime. Data will only be report according to MaxTime (MinTime) duration regardless BatteryVoltageChange value.
Device
Type
MinTime
(2bytes Unit: s) (2bytes Unit: s)
Status
(0x00_success)
0x42
MinTime
(2bytes Unit: s) (2bytes Unit: s)
Wakes up and collects data
REPORTS 3.6V
NetvoxPayLoadData
MaxTime BatteryChange
(1byte Unit:0.1v)
(8Bytes, Fixed 0x00)
Reserved (9Bytes, Fixed 0x00)
MaxTime BatteryChange
(1byte Unit: 0.1v)
MaxTime
Sleeping(MinTime)
Wake up and collects data
REPORTS 3.6V
6
ADCRawValue
Change
(4Bytes, Fixed0x00)
(2byte Unit: 1mV)
Reserved
ADCRawValue
Change
(4Bytes, Fixed 0x00)
(2byte Unit: 1mV)
Reserved
Reserved