Dacor Discovery DYRP48DS Use And Care Manual page 20

Hide thumbs Also See for Discovery DYRP48DS:
Table of Contents

Advertisement

Oven Racks
You may use either rack type on any level inside the oven.
WARNING
To reduce the chance of burns, position the oven racks when the
oven is cool. If you must reposition a rack when the oven is hot,
use pot holders.
To insert a standard oven rack...
1. Insert the end of the rack with the safety notches into
the oven first.
2. Attach both sides of the rack to the rack supports in
the oven as shown in the diagram below.
3. Begin to slide the rack in, and then, lift up so that the
safety notches clear the ends of the rack supports.
4. Push the rack all the way in with both hands.
To remove a standard oven rack...
Grasp it with both hands and pull gently straight out
toward you until it stops.
To remove the rack completely, lift the front of the
rack up about six inches and continue to pull it out.
Lifting the rack releases the safety notches. The
safety notches reduce the chances of a rack coming
out of the oven accidentally.
Front of rack
Standard
Rack
Basic Oven Operation
Back of rack
Rack
support
Safety
Slide oven rack
notch
supports into slots
on the rack
To insert a GlideRack oven rack...
Your oven also comes with Dacor GlideRack oven racks.
You can pull a GlideRack oven rack out further than a
standard rack and still support heavy pots and pans full of
food. It is great for heavier foods and the optional Dacor
baking stone.
1. Align both sets of safety clips (right and left) on the
back of the rack guides with the oven rack supports as
shown below. NOTE: The diagram below shows instal-
lation with the rack guides extended but, the rack
may be installed with or without the guides extended,
whichever is easier.
2. Begin to slide the rack in, lifting the front safety clips
over the front of the oven rack supports.
3. Push the rack all the way in.
4. Grasp the rack in the center of the front and pull. The
rack should come forward while the guides remain in
place.
To remove a GlideRack oven rack...
Grasp the rack with both hands and pull it gently
straight out toward you until it stops.
Lift up until the front safety clips just clear the front
of the rack supports on the oven. Continue to pull out.
Moving the end of the rack back and forth slightly, left
to right, as you pull, will make it easier to remove.
Front of
rack
GlideRack
Oven Rack
Slide oven rack supports
between back safety clips
18
Rack
guides
Lift front safety
clips over rack
supports
Back of
guide
Oven rack
support

Advertisement

Table of Contents
loading

This manual is also suitable for:

Discovery dyrp48d-c-sDiscovery dyrp48dsngh

Table of Contents