Dacor Modernist Pro DOP48M96DL Series Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Dacor Manuals
  4. Ranges
  5. DOP48M96DL Series
  6. Installation instructions manual

Dacor Modernist Pro DOP48M96DL Series Installation Instructions Manual

Hide thumbs Also See for Modernist Pro DOP48M96DL Series:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Installation Instructions
Modernist Pro Range
DOP48M96DL*/DOP36M94DL*

Advertisement

Table of Contents
loading

Related Manuals for Dacor Modernist Pro DOP48M96DL Series

Summary of Contents for Dacor Modernist Pro DOP48M96DL Series

  • Page 1 Installation Instructions Modernist Pro Range DOP48M96DL*/DOP36M94DL*...

  • Page 2: Table Of Contents

    Contents Before you begin Important About this manual Important note to the installer Important note to the consumer Important note to the servicer Customer service information Important safety instructions Read all instructions before using this appliance Symbols used in this manual Product specifications What's in the box Installation requirements...
  • Page 3 Website: www.Dacor.com Thank you for choosing Dacor for your home. We are a company built by families for families, and we are dedicated to serving yours. We are confident that your new Dacor product will deliver a high level of performance and enjoyment for many years to come.
  • Page 4 WARNING: Failure to follow the instructions in this manual exactly may cause a fire or explosion, and, consequently, property damage, personal injury, or death. • DO NOT keep or use gasoline or other flammable products near this appliance. • IF YOU SMELL GAS: - DO NOT light any appliances.

  • Page 5: Before You Begin

    Before you begin Important Installer • To promote safety and minimize problems, read this manual thoroughly before starting the installation. Leave this manual with the user. • Write the appliance’s model/serial numbers in this manual for service/ maintenance reference. User •...

  • Page 6: About This Manual

    Before you begin About this manual READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY. Important note to the installer • Read all instructions contained in these installation instructions before installing the cooktop. • Remove all packing materials from the cooktop compartments before connecting the electric and gas supply to the cooktop.

  • Page 7: Customer Service Information

    Customer service information If you have questions or problems with installation, contact your Dacor dealer or the Dacor Customer Service Team. For repairs to Dacor appliances under warranty call the Dacor Distinctive Service line. Whenever you call, have the model and serial number of the appliance ready.

  • Page 8: Important Safety Instructions

    Important safety instructions ANTI-TIP DEVICE WARNING ALL RANGES CAN TIP, RESULTING IN PERSONAL INJURY. TIPPING RANGES CAN CAUSE BURNS FROM SPILLS, PERSONAL INJURY, AND/OR DEATH. INSTALL AND CHECK THE ANTI-TIP BRACKET FOLLOWING THE INSTRUCTIONS AND TEMPLATE SUPPLIED WITH THE BRACKET. •...

  • Page 9: Read All Instructions Before Using This Appliance

    READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE • Electrical and gas equipment with moving parts can be dangerous. The important safety instructions in this manual are intended to minimize the risk of property damage, personal injury, and death. Be sure to read them. •...
  • Page 10 Important safety instructions State of California Proposition 65 Warning (US only) WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Gas appliances can cause low-level exposure to Proposition 65 listed substances (including benzene, carbon monoxide, formaldehyde, and soot) resulting from the incomplete combustion of LP or natural gas.
  • Page 11 • Do not use the product as a space heater. This product is to be used for cooking purposes only. • Do not use oven cleaners or oven liners in or around any part of the oven. • Use only dry pot holders. •...
  • Page 12 Important safety instructions Fire safety WARNING To reduce the risk of fire, electric shock, personal injury, or death, observe these precautions: • Do not store/place/use combustible materials (e.g., paper, plastic, pot holders, linens, gasoline, alcohol) near the product. • Do not wear loose fitting or hanging garments while using the product.
  • Page 13 Gas safety WARNING To reduce the risk of fire, electric shock, personal injury, or death, observe these precautions: If you smell gas: • Close the valve and do not use the product. • Do not light a match, candle, or cigarette. •...
  • Page 14 Important safety instructions Electrical and grounding safety WARNING To reduce the risk of fire, electric shock, personal injury, or death, observe these precautions: • Plug into a grounded 3-prong outlet. • Do not remove the ground prong. • Do not use an adapter or an extension cord.
  • Page 15 Installation safety WARNING To reduce the risk of fire, electric shock, personal injury, or death, observe these precautions: • This product should be installed and properly grounded by a qualified installer, as specified in the Installation Instructions. Adjustments and service should be performed only by qualified gas range installer or service technician.
  • Page 16 Important safety instructions Location safety WARNING To reduce the risk of fire, electric shock, personal injury, or death, observe these precautions: • This range is for indoor household use only. Do not install the range outdoors or anywhere that it will be exposed to weather/water or wind/ strong drafts.
  • Page 17 Cooktop safety WARNING To reduce the risk of fire, electric shock, personal injury, or death, observe these precautions: • Make sure all burners are off when not in use. • Do not use aluminium foil to line the grates or any part of the cooktop. •...
  • Page 18 Important safety instructions • When frying, always heat the oil slowly, and monitor the oil as it heats. When frying foods at high heat, monitor the oil throughout the cooking process. If combining fats or oils for frying, mix them together before heating. •...
  • Page 19 • Keep the oven free from grease buildup. • When repositioning the oven racks, make sure the oven is completely cool. • Do not leave plastic items inside the oven. • To avoid damaging the burner control knobs or oven control, always bake and/or broil with the oven door closed.
  • Page 20 Important safety instructions Self-cleaning oven safety WARNING To reduce the risk of fire, electric shock, personal injury, or death, observe these precautions: • The self-cleaning feature operates the oven at temperatures high enough to burn away food soils in the oven. The range is extremely hot during a self-cleaning cycle.

  • Page 21: Product Specifications

    Product specifications What's in the box Parts list - DOP48M96DL* Grates (3) Burner heads (6) and Burner Griddle (1) caps (7) Convection filter (3) Temp. Probe (2) Glide racks (2) WOK ring (1) Anti-tip bracket (1) Wire rack (1) Small rack (1)* Steam tray (2)* Half steam tray (2)* NOTE...
  • Page 22 Product Specifications Parts list - DOP36M94DL* Grates (2) Burner heads (4) and Burner Wire rack (1) caps (5) Convection filter (2) Temp. Probe (1) Glide racks (2) Griddle (1) WOK ring (1) Anti-tip bracket (1) The range is supplied with two different types of burner caps (brass and porcelain) to suit the customer’s preference.
  • Page 23 Parts needed Gas line shut-off valve Flexible metal appliance Flare union adapter ¾ in connector ½ in (ID) x 5 ft (NPT) x ½ in (ID) 135-degree elbow Lag bolt or ½-in (OD) Flare union adapter ½ in (optional) sleeve anchor (NPT) x ½...

  • Page 24: Installation Requirements

    • The range may be installed flush to the rear wall. Dacor strongly recommends installing a non-combustible material on the rear wall above the range and up to the vent hood or installation of a backguard.
  • Page 25 Minimum dimensions WARNING If overhead cabinets are provided, a range hood should also be provided that projects horizontally a minimum of 5 in (12.7 cm) beyond the front of the cabinets. This will dissipate any heat buildup in the overhead cabinets to prevent death, personal injury, and/or fire hazard.
  • Page 26 Installation requirements Product dimensions NOTE Product tolerances: ±1/16” (±1.6 mm) Front of open door 48” (121.9 cm) 28 1/8” (71.4 cm) Front of handle 27 1/2” (69.9 cm) Front edge of bull nose 26” (66.0 cm) Front panel 23 15/16” (60.8 cm) Rear of oven door 1 1/4”...
  • Page 27 Cabinet dimensions • All maximum and minimum dimensions and clearances shown in the diagrams below must be maintained for safe operation. • Check the location where the range is to be installed. It should be placed away from drafts that may be caused by doors, windows and heating and air conditioning outlets. •...

  • Page 28: Location Requirements

    Installation requirements Vertical from range grate level to combustible overhead surface; if installing an overhead vent hood, also check hood specifications for minimum required clearances. Cabinet/countertop depth is at discretion of customer but cabinet face MUST NOT protrude further than rear of front panel, see product dimensions. Consult local code for exact location requirements.
  • Page 29 DOP36M96DL* 28.4 cm (11 3/16") Gas Inlet Back of range 61.6 cm (24 1/4") Shown with electrical access cover removed 16.8 cm (6 5/8") 22.5 cm (8 7/8") Measurement with appliance legs adjusted to lowest height. The hole size for the electrical wiring may be increased to 1 1/8” (2.9 cm) by removing the conduit bracket in the bottom of the range electrical box.
  • Page 30 Installation requirements Gas and Electrical Service • The shaded area shown below denotes the location of the gas inlet and the electrical junction box/receptacle. This is the recommended location. For replacement purposes, the location of the existing utilities may be utilized provided they do not interfere with the sides or rear of the range.

  • Page 31: Gas Requirements

    Gas requirements Provide adequate gas supply. The installation of this appliance must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54. The cooktop of this range is designed to operate at a manifold pressure of 5 in (13 cm) of water column on natural gas.

  • Page 32: Special Gas Requirements (Gas Models Sold In Massachusetts)

    Installation requirements The pressure regulator located at the inlet of the cooktop manifold must remain in the supply line regardless of whether natural or LP gas is being used. NOTE • The rangetop has its own regulator. Use only the provided regulator, which must be installed in the gas line that runs from the cooktop gas inlet to the gas shut-off valve.

  • Page 33: Electrical Requirements

    Electrical requirements • Failure to follow these instructions can result in death, fire, or electrical shock. WARNING • It is the owner’s responsibility to make sure that the electrical service meets electrical requirements and that he electrical outlet has been properly installed by a licensed electrician.

  • Page 34: Installation Instructions

    Installation instructions Preparing for installation WARNING • If the gas or electric service provided does not meet the product specifications, do not proceed with the installation. Call the dealer, the gas supplier or a licensed electrician. • Before installing the range, you must locate and secure the anti-tip bracket to the floor. NOTE Within the Commonwealth of Massachusetts, this appliance must be installed by a licensed plumber or gas fitter.
  • Page 35 Installing the Anti-Tip Bracket on the Floor WARNING To perform its intended function, the anti-tip bracket must be attached as instructed to the concrete slab or wood sub-floor below any floor coverings (including cement board) on top. Do not attach the anti-tip bracket directly to floor coverings such as ceramic/asphalt tile or linoleum.
  • Page 36 Installation instructions Attaching the bracket to a concrete floor: • Drill four (4) 3/8” diameter countersink holes through any existing floor covering down to the concrete slab below. • Drill the 4 holes for the anchors 1 1/4” (3.2 cm) deep into the concrete slab using a 3/16”...
  • Page 37 SCREW SIZE TABLE Sub-Floor Type/Floor Covering Thickness Screw Size Concrete or wood subfloor, no floor covering #8 x 1 * over top Concrete or wood subfloor, floor covering up #8 x 1 * to 1/4” thick Concrete or wood subfloor, floor covering #8 x 1 1/4 * over 1/4”...
  • Page 38 Installation instructions Installing the Anti-Tip Bracket on the Wall 1. Determine the suitability of wall mounting the anti-tip bracket. To use the wall mount option, the range front panel must not be more than 26 1/2” (67.3 cm) from the wall and the bracket screws must be able to thread into the base plate inside the wall behind.
  • Page 39 #12 x 1 3/4” screw, This hole lines up with 4 places bracket center line Back wall Range center line Range front panel Bracket center line Top View - Location of Wall Mounted Anti-Tip Bracket ANTI-TIP BRACKET PLACEMENT Dimension DOP36M94DL* DOP48M96DL* 14 1/8”...
  • Page 40 Installation instructions Removing the Oven Door WARNING • Do not attempt to disengage the hinge catches with the door(s) removed from the range. The hinge springs could release causing personal injury. • Do not lift or carry the oven door(s) by the handle. NOTE When installing a backguard, always install it before sliding the range into place.
  • Page 41 Electrical connection CAUTION For personal safety, do not use an extension cord with this appliance. Remove house fuse or open circuit breaker before beginning installation. This appliance must be supplied with the proper voltage and frequency, and connected to an individual properly grounded branch circuit, protected by a circuit breaker or fuse having amperage as specified on the rating plate.
  • Page 42 Installation instructions Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range. When installing an electric range in new construction, follow Steps 2 and 3 for 4-wire connection. You must use a 3-wire or 4-wire, single-phase A.C.
  • Page 43 Accessing the power cord connection Remove the rear access cover and loosen the screw with a screwdriver. The terminal block will then be accessible. Terminal block Access cover Specified power-supply-cord kit rating Specified rating Diameter (inches) of range Range rating, watts of power- connection opening supply-cord kit,...
  • Page 44 Installation instructions Installing the power cord For power cord installations, hook the Conduit connection strain relief over the power cord hole (1⅜") plate located below the rear of the drawer body. Insert the power cord through the strain relief and tighten the device. Power cord •...
  • Page 45 Installing a 4-wire power cord WARNING The neutral wire of the supply circuit must be connected to the neutral terminal located in the lower center of the terminal block. The power leads must be connected to the lower left and the lower right terminals of the terminal block. The grounding lead (Green) must be connected to the frame of the range with the ground plate and the ground screw.
  • Page 46 Installation instructions Installing the conduit Remove the conduit connection plate from the rear of the drawer body and rotate it as shown below. The conduit hole (1⅛") must be used. 1⅛" 1⅜" 1⅜" 1⅛" 1. Prepare the conduit cord shown in Figure 1. 2.
  • Page 47 Installing a 3-wire conduit • Aluminum building wire may be used but it must be rated for the correct amperage and voltage. Connect wires according to Step 4 depending on the number of wires. • Wire used, location and enclosure of splices, etc., must conform to good wiring practices and local codes.
  • Page 48 Installation instructions Installing a 4-wire conduit • Aluminum building wire may be used but it must be rated for the correct amperage and voltage. Connect wires according to this Step 4 depending on the number of wires. • Wire used, location and enclosure of splices, etc., must conform to good wiring practices and local codes.
  • Page 49 Gas connection WARNING • Make sure the gas supply valve is off and that the power to the range is turned off at the circuit breaker or fuse box prior to connecting the gas line. • Do not apply excessive pressure when tightening gas connections and fittings. •...
  • Page 50 Installation instructions Before sliding the range into the cabinet: 1. Make sure the gas supply valve is in the off position and that power to the range is off. 2. Connect a flexible gas supply line to the gas shut-off valve previously installed on the stub out.
  • Page 51 Final installation 1. Peel the protective coating off of the range, including the door. * Distance to floor: 4 1/16” to 5 5/16” 2. Measure from the floor to the countertop. Adjust the leveling legs as required to position the trim around Rear leg Back of range the cooktop even with or above the...
  • Page 52 Installation instructions Re-installing the Oven Door(s) WARNING To avoid personal injury or damage to the door from it falling off its hinges: • Make sure that the notch on the bottom of each hinge rests on top of the lower lip of each hinge receptacle before attempting to open the oven door.
  • Page 53 Door adjustment (DOP48M96DL* Only) After re-installing the oven doors, make sure the oven doors to be parallel and flush. There are 3 bolts around the Steam oven, one on the right-upper side of the steam oven, and two under the each door hinge. The upper bolt helps adjusting the door back and forth.

  • Page 54: Installing The Knobs For Surface Burners

    Installation instructions Installing the knobs for surface burners WARNING Installing the range knobs in the wrong position may result in damage to the griddle included with the range. The knobs for the center burners are marked with the maximum griddle settings. NOTE When installing the knobs, align the “D”...

  • Page 55: Cooktop Assembly

    Cooktop assembly Assembling the rangetop burners CAUTION • Do not operate the rangetop burners without all burner parts in place. • Do not push in any rangetop controls while removing the burner; a slight electrical shock might result, perhaps causing you to knock over hot cookware. •...
  • Page 56 Installation instructions Dual Burner head / caps 1. Orient the burner head so the opening for the electrode aligns with the electrode. 2. Install the burner head so the electrode passes through its opening in the head. Ensure the burner head lies flat on the stove top.
  • Page 57 Round Burner head / caps 1. Put the burner heads on the burner bases as shown at left. The bottom of the head fits within the burner base. 2. Turn the head until it drops into place. Twist the head back and forth slightly to ensure it is properly seated.
  • Page 58 Installation instructions SimmerSear Burner Assembly (18K BTU Burner) 1. Put the burner heads in place as shown Burner head below. The locating tab on the burner head goes in the keyed hole as shown. Locating Burner base Keyed hole 2. Put the burner rings on the burner Burner ring heads as shown below.
  • Page 59 Installing the grates NOTE For best results and longest life, install the grates as instructed below. When installed properly, the openings in the grates are centered over the burners. The grates occupy specific positions on the rangetop. For maximum stability and safe operation, these grates should only be used in their proper positions.

  • Page 60: Verifying Proper Operation

    Installation instructions Verifying proper operation Before operating the range, read the accompanying use and care manual completely. It contains Important safety, service and warranty information. 1. Before beginning the test procedure, ensure that all cooktop control valves are in the OFF position, and all burner rings, burner caps, and grates are properly positioned on the cooktop frame.
  • Page 61 3. Repeat the above bake test or burner ignition test. 4. If the appliance still does not work, contact Dacor Distinctive Service at (800) 793- 0093 ex. 2822. Do not attempt to repair the appliance yourself. Have the model and serial numbers available when you call.
  • Page 62 Installation instructions This page left blank intentionally English...

  • Page 63: Removal And Re-Installation

    Removal and Re-installation Removing the Range for Service 1. Turn the gas supply valve to the off position. 2. Turn off power to the range at the circuit breaker panel or fuse box. 3. Pull the range out from the wall Reinstalling the Range After Service 1.

  • Page 64: Installation Checklist

    • Proper installation is the responsibility of the homeowner. The importance of proper installation of your Dacor range cannot be overemphasized. - Has the plastic coating been peeled off the outside of the range? Have all packaging...
  • Page 65 MEMO...
  • Page 66 MEMO...
  • Page 67 IMPORTANT: Your warranty will not begin until you activate it online or return this form to Dacor. If you have purchased more than one Dacor product, please return all forms in one envelope, or activate the warranty for each product online.
  • Page 68 DG68-00936A-00 Dacor ∙ 14425 Clark Avenue, City of Industry, CA 91745 ∙ Phone: (800) 793-0093 ∙ Fax: (626) 403-3130 ∙ www.dacor.com...

This manual is also suitable for:

Modernist pro dop36m94dl series

Table of Contents