o Before placing the burners back on the hob top, make sure that
the gas jet is not blocked.
o IMPORTANT: Make sure that you reassemble the burners in the
original way.
Maintaining the cast iron pan stands
(BGHU610/BGHU700 only)
o IMPORTANT: Make sure that the hob surface and pan stands
have cooled before you attempt to touch them.
o Wipe the pan stands over with a soft, damp cloth that has been
put into warm soapy water. The cloth should be wrung out after
being taken out of the soapy water.
o Using a paper towel, thoroughly dry the pan stands.
o To maintain the appearance of the cast iron pan stands, we
would recommend that you rub a small amount of olive oil into
the pan stands, after you have finished cleaning them.
Installation
The installation must be carried out by a GASSAFE
registered installer, in accordance with the current
version of the following.
o Gas Safety Regulations (Installation & Use)
o Building Regulations (issued by the Department of Environment)
o Building
Standards
Department)
o IEE Wiring Regulations
o Electricity at Work Regulations BS 6172
o Installation of Domestic Gas Cooking Appliances (if necessary,
BS 5482 Installation of Domestic LPG Appliances)
o BS 5440 Installation of Flues and Ventilation for Gas Appliances
o The manufacturer's Installation Instructions
(Issued
by
the
Scottish
Development
16