Audio Alert - QNAP TS-1283XU-RP User Manual

LED
Drive
Expansion
Note
The expansion unit LEDs
do not apply to 9-bay
models.

Audio Alert

Duration
Short beep (0.5 seconds) 1
Long beep (1.5 seconds) 3 (every 5 minutes)
Flashes red
Red
Flashes green
Green
Orange
Off
Frequency
3
2
1
Status
The drive is being accessed and a
read/write eror occurs during the
process.
A drive read/write error has
occurred.
The data is being accessed.
The drive can be accessed.
No JBOD expansion unit has been
detected.
• The NAS is starting up.
• The NAS is shutting down (software shutdown).
• The user pressed the Reset button.
• The operating system was updated.
The user tried to copy the NAS data to the external
storage device from the front USB port, but the data
cannot be copied.
The system fan is not functioning.
• The disk volume is about to reach its full
capacity.
• The disk volume has reached its full capacity.
• The drives are in degraded mode.
• The user started the drive rebuilding process.
• A drive is plugged in or out.
• The NAS was powered off by force shutdown
(hardware shutdown).
• The NAS was powered on successfully and is
ready.
TS-x83XU User Guide
Description
• A SAS JBOD expansion unit
has been detected.
• A REXP expansion unit has
been detected.
Description
Basic Operations 40