Table of Contents
Advertisement
3 WALL MOUNT BRACKET INSTALLATION
3.1 Component Installation
Wall mount bracket is shown as below. See Figure 3-1.
3.2 Installation
3.2.1 Installation Requirements
The wall mount speed dome can be installed in the hard construction wall in the indoor or
outdoor environments. Before the installation, please make sure:
The wall is thick enough to install the expansion bolt.
The wall can at least sustain the 8x weight of the speed dome.
3.2.2 Installation Steps
Step 1
See Figure 3-2. Please draw four holes position in the wall according to the hole of the bottom of
the wall mount bracket. Then you can dig four holes and insert the expansion bolts (not
provided). Use four hex bolts and flat washer to fix the bracket in the expansion bolts.
Figure 3-1
17
Advertisement
Table of Contents
