Resetting Control Panel Defaults - Epson C11CK57201 User Manual

1. Disconnect any interface cables connected to your product.
2. Load plain paper in the product.
3. Press the
4. Select Maintenance and press the OK button.
5. Select Nozzle Check and press the OK button.
6. Press the
The nozzle check pattern is printed.
7. Do one of the following, depending on the results of the product check:
• If the page prints and the nozzle check pattern is complete, the product is operating properly. Any
operation problem you may have could be caused by your computer, cable, software, or selected
settings. Check other solutions or try uninstalling and reinstalling your printer software.
• If the page prints but the nozzle check pattern has gaps, clean or align the print head.
• If the page does not print, the product may have a problem. Check other solutions. If they do not
work, contact Epson.
Parent topic:
Related concepts
Print Head Alignment
Print Head Cleaning
Power Cleaning
Uninstall Your Product Software
Related references
Where to Get Help
Related topics
Loading Paper

Resetting Control Panel Defaults

If you have a problem with settings on the product control panel, you can reset them to their factory
defaults. You can choose which settings to reset or reset them all.
1. Press the
2. Select Settings and press the OK button.
3. Select Restore Default Settings and press the OK button.
home button, if necessary.
start button.
Solving Problems
home button, if necessary.
242