Table of Contents
Advertisement
Viewing a touch screen
The following examples describe two types of screens
displayed on the touch screens.
■ OVERVIEW screen
This screen shows the main parameters of 12 channels
selected as a layer.
■ SELECTED CHANNEL VIEW screen
This screen shows all mix parameters of the currently-
selected channel.
32
RIVAGE PM10 System Setup Guide
Quick Guide
This section describes the basic setup procedure for the
RIVAGE PM10 system.
Basic system configuration
I/O Network
Console Network
The setup procedure is explained using a system
comprised of the following devices:
• Control surface (CS-R10) ×1
• DSP engine (DSP-R10) ×1
• I/O rack (RPio622) ×1
• HY card (HY256-TL) ×2
• RY card (RY16-ML-SILK) ×1
• RY card (RY16-DA) ×1
Procedure
Installing an optional card
Setting the Unit ID
Connecting the devices
Turning on the power to the RIVAGE PM10 system
Setting the word clock
Assigning channels to the TWINLANe network
Patching the input ports
Patching the output ports
Setting the analog gain for HA (Head Amp)
Sending an input channel signal to the STEREO bus
Advertisement
Table of Contents
