Download  Print this page

Viewing A Touch Screen; Quick Guide; Basic System Configuration - Yamaha RIVAGE PM10 Systems Setup Manual

Digital mixing system.
Hide thumbs

Advertisement

Table of Contents

Viewing a touch screen

The following examples describe two types of screens
displayed on the touch screens.
■ OVERVIEW screen
This screen shows the main parameters of 12 channels
selected as a layer.
■ SELECTED CHANNEL VIEW screen
This screen shows all mix parameters of the currently-
selected channel.

Quick Guide

This section describes the basic setup procedure for the
RIVAGE PM10 system.

Basic system configuration

I/O Network
Console Network
The setup procedure is explained using a system
comprised of the following devices:
• Control surface (CS-R10) ×1
• DSP engine (DSP-R10) ×1
• I/O rack (RPio622) ×1
• HY card (HY256-TL) ×2
• RY card (RY16-ML-SILK) ×1
• RY card (RY16-DA) ×1
Procedure
Installing an optional card
Setting the Unit ID
Connecting the devices
Turning on the power to the RIVAGE PM10 system
Setting the word clock
Assigning channels to the TWINLANe network
Patching the input ports
Patching the output ports
Setting the analog gain for HA (Head Amp)
Sending an input channel signal to the STEREO bus
RIVAGE PM10 System Setup Guide
31

Advertisement

Table of Contents

   Related Manuals for Yamaha RIVAGE PM10

Comments to this Manuals

Symbols: 0
Latest comments: