Table of Contents
Advertisement
@ Layer Select [A]/[B]/[C]/[D]/[E]/[F] keys
Enable you to select a layer. Different layers are recalled to the faders depending on the combination of the keys, as
shown in the table below:
Key
[INPUT 1-72]
[A]
Input 1-12
[B]
Input 13-24
[C]
Input 25-36
[D]
Input 37-48
[E]
Input 49-60
[F]
Input 61-72
# [HOME] key
Recalls a group of settings. Press and hold down this key to store the following settings:
• Current screen
• Selected channel/parameter on the screen
• Selected layer
Front panel
CS-R10
2
3
CS-R10-S
2
3
[INPUT 73-144]
[OUTPUT MIX]
Input 73-84
Input 85-96
Input 97-108
Input 109-120
Input 121-132
Input 133-144
1
4
3
1
4
3
[OUTPUT MATRIX]
MIX 1-12
MATRIX 1-12
MIX 13-24
MATRIX 13-24
MIX 25-36
MATRIX 25-36
MIX 37-48
–
MIX 49-60
–
MIX 61-72
–
1 Brightness control knob
Adjusts brightness of the light below the console.
2 Headphone hanger
To use the hanger, pull out the knob, and then turn it
counter-clockwise. (The hanger will be locked in
place.)
To put away the hanger, turn the knob clockwise to
unlock it, and then push it in.
3 PHONES A/B [LEVEL] knobs
Adjust the level of the signal output from the
PHONES OUT jacks respectively.
4 PHONES A/B output jacks
These are headphone jacks for monitoring the
MONITOR or CUE signal.
[DCA]
DCA 1-12
DCA 13-24
–
–
–
–
RIVAGE PM10 System Setup Guide
25
Advertisement
Table of Contents
