Patching The Input Ports - Yamaha CS-R10 Systems Setup Manual

10.
Press the Channel assign popup button.
For this example, select RY card slot 1.
11.
Press the APPLY button.
The setting will be applied to the output from the I/O
rack to the TWINLANe network.
12.
When a confirmation dialog appears, press
the OK button.
38 RIVAGE PM10 System Setup Guide

Patching the input ports

This section explains how to patch an input channel to the
input jack to which a microphone was connected in the
"Connecting the devices" section.
NOTE
The PATCH screen displays the input/output jacks assigned to
the TWINLANe network.
1.
Press the PATCH button on the menu bar in
the touch screen.
The PATCH screen will appear.
2.
Press the INPUT tab.
3.
Use the knob in the upper-right corner to
display the desired input jacks.
NOTE
If you press an on-screen knob that you want to control,
you will be able to operate the knob via the [TOUCH AND
TURN] knob.
If you select RY card slot 1 on the I/O rack (M1),
"M1/RY SLOT1" will appear.
4.
Use the knob in the lower left corner to
display the input channels.