Lcd Monitor Quality And Pixel Policy - HP x2301 User Manual

automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In
addition to the factory preset modes, there are at least ten user modes that can be entered and stored.

LCD Monitor Quality and Pixel Policy

Your LCD Monitor uses high-precision technology, manufactured according to high standards, to help
guarantee trouble-free performance. Nevertheless, the display might have cosmetic imperfections that
appear as small bright or dark spots. This is common to all LCD displays that are used in products
supplied by all vendors and is not specific to your LCD Monitor. These imperfections are caused by one
or more defective pixels or subpixels.
A pixel consists of one red, one green, and one blue subpixel. A defective whole pixel is always turned
on (a bright spot on a dark background), or it is always off (a dark spot on a bright background). The
first is the more visible of the two. A defective subpixel (dot defect) is less visible than a defective whole
pixel, and is small and only visible on a specific background.
To locate defective pixels, the monitor must be viewed under normal operating conditions and in
normal operating mode at a supported resolution and refresh rate, from a distance of approximately
50 cm (16 inches).
For more information about your LCD Monitor and pixel policy, see the HP website at
http://www.hp.com/support. To find pixel policy information on the HP website, type in "HP Pixel
Policy" in the search box and press Enter.
ENWW LCD Monitor Quality and Pixel Policy 23