Download  Print this page

Entering User Modes; Power Adapters; Lcd Monitor Quality And Pixel Policy - HP 2011x User Manual

Hide thumbs

Advertisement

Entering User Modes

The video controller signal might occasionally call for a mode that is not preset if:
You are not using a standard graphics adapter.
You are not using a factory preset mode.
It this occurs, you might need to readjust the parameters of the monitor screen by using the on-screen
display. Your changes can be made to any or all of these factory preset modes and saved in memory.
The monitor automatically stores the new setting, then recognizes the new mode just like it does a
factory preset mode. Also there are at least ten user modes that can be entered and stored.

Power Adapters

Table B-9
Manufacturer
TPV Technology Group
LiteOn
APD, Asian Power Devices, Inc.
Delta

LCD Monitor Quality and Pixel Policy

Your LCD monitor uses high-precision technology, manufactured according to high standards, to help
guarantee trouble-free performance. Nevertheless, the display might have cosmetic imperfections that
appear as small bright or dark spots. This is common to all LCD monitor displays used in products
supplied by all vendors and is not specific to your LCD monitor. These imperfections are caused by one
or more defective pixels or subpixels.
A pixel consists of one red, one green, and one blue subpixel. A defective whole pixel is always turned
on (a bright spot on a dark background), or it is always off (a dark spot on a bright background). The
first is the more visible of the two. A defective subpixel (dot defect) is less visible than a defective whole
pixel, and is small and only visible on a specific background.
To locate defective pixels, the monitor should be viewed under normal operating conditions and in
normal operating mode at a supported resolution and refresh rate, from a distance of approximately
50 cm (16 in). We expect that, over time, the industry will continue to improve its ability to produce
displays with fewer cosmetic imperfections, and we will adjust guidelines as improvements are made.
For more information about your LCD monitor and pixel policy, refer to the HP Web site at:
www.hp.com/support. To find pixel policy information on the HP Web site, type in "HP Pixel Policy" in
the search box and press Enter.
30
Appendix B Technical Specifications
Downloaded from ManualMonitor.com Manuals
Power Adapters
Model Number
ADCP1236
PA-1041-03TA-LF, PA-1041–0
DA-36N12, DA-50F19
ADP-40DD B Series

Advertisement

Table of Contents

   Also See for HP 2011x

   Related Manuals for HP 2011x

This manual is also suitable for:

2011s2011xi2211x2211f2311cm2311f ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: