Download  Print this page

HP OMEN X 25f Disassembly Instructions Manual

Product end-of-life disassembly.
Hide thumbs

Advertisement

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
OMEN X 25f
HSD-0021-Q
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the
disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive
2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on the
plastic part. For any questions on plastic marking, please contact
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries, excluding Li-Ion batteries.
Li-Ion batteries. Include all Li-Ion batteries if more than
one is provided with the product (such as a detachable
notebook keyboard battery, RTC coin cell, etc.)
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater than
100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
Notes
With a surface greater than 10 sq cm
I/F Board*1, Ctrl Board*1, Ctrl Lens Board*1, LED
Board*1, LED Driver Board*1, G-sync2 Board*1
All types including standard alkaline, coin or button style
batteries
Battery(ies) are attached to the product by (check all
that apply with an "x" inside the "[ ]"):
[
[
[
[
NOTE: Add detailed removal procedures including
required tools in the sections 3.1 and 3.2.
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps panel*1
HPI instructions for this template are available at
HP's Sustainability
Contact.
] screws
] snaps
] adhesive
] other. Explain
EL-MF877-01
Quantity of
items
included in
product
6
0
0
0
1
0
0
Page 1

Advertisement

Table of Contents

   Related Manuals for HP OMEN X 25f

   Summary of Contents for HP OMEN X 25f

  • Page 1 Product Category: Monitors and Displays Marketing Name / Model [List multiple models if applicable.] OMEN X 25f HSD-0021-Q Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Quantity of items Item Description Notes included in product Electrolytic Capacitors / Condensers measuring greater In adapter than 2.5 cm in diameter or height External electrical cables and cords DP cable*1, USB3.0 cable*1, Power cord*1, Adapter*1 Gas Discharge Lamps Plastics containing Brominated Flame Retardants weighing >...
  • Page 3 Release screws on the power board and interface board, then disassemble power-BD and interface-BD from the chassis. Separate the front bezel from the panel, then use tool to release screws to disassemble ctrl-BD and separate the button and lens from the bezel. Tear the AL-tape on the middle-top side and release side mount screws(*4) to separate chassis and panel, then disassemble the LVDS FFC and lamp wire from the panel by hand.
  • Page 4 3. Use tool to separate rear cover from monitor head through tear down slot. 4. Use tool to release screw bezel trin, then separate bezel trin plastic, lens and bezle trin SHD. EL-MF877-00 Page 4 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...
  • Page 5 5. Separate rear cover by hand. EL-MF877-00 Page 5 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...
  • Page 6 6. Separate ctrl FFC & stand LED FFC 7. Use tool to release screw, then separate ctrl PCB, stand LED PCB and power LED PCB from rear cover. EL-MF877-00 Page 6 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...
  • Page 7 8. Separate internal and release tape *3, power wire and LVDC FFC EL-MF877-00 Page 7 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...
  • Page 8 9. Use tool to release screw, then separate middle frame. 10. Use tool to release screw, then separate interface PCB and LED driver PCB 11. Remove the screws form column, and separate plastic part. 12. Remove cable clip. EL-MF877-00 Page 8 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at...
  • Page 9 EL-MF877-00 Page 9 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...
  • Page 10 13. Remove the screw from hook, and remove hook. 14. Remove the screw from BKT, and remove life module, and disassemble lift module. EL-MF877-00 Page 10 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...
  • Page 11 15. Remove the rubber from base. EL-MF877-00 Page 11 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...

Comments to this Manuals

Symbols: 0
Latest comments: