Power-Saver Feature - HP x2301 User Manual

Hp x2301: user guide
Table of Contents

Advertisement

Check Video Cable—Indicates a video input cable is not properly connected to the computer or
monitor.
OSD Lockout—The OSD can be enabled or disabled by pressing and holding the Menu button on
the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lockout appears
for 10 seconds. If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the
OSD. If the OSD is unlocked, press and hold the Menu button for 10 seconds to lock the OSD.
Dynamic Contrast Ratio ON—Indicates that DCR is turned on.
Dynamic Contrast Ratio OFF—Indicates that DCR has been turned off in the OSD or was
automatically turned off after changes were made to Brightness, Contrast, or Quick View in the
OSD.
No Input Signal—Indicates the monitor is not receiving a video signal from the computer on the
monitor video input connector. Verify if the computer or input signal source is off or in the power-
saver mode.

Power-Saver Feature

When the monitor is in normal operating mode, the Power light is blue and the monitor uses the normal
watts of power. For power usage, see the
The monitor also supports a power-saver mode that is controlled by the computer. When the monitor is
in the reduced-power state, the monitor screen is blank, the backlight is off, the Power light is amber,
and the monitor uses minimum power. When the monitor is "awakened," a brief warm-up period
occurs before the monitor returns to normal operating mode. The energy-saving reduced power state
activates if the monitor does not detect either the horizontal sync signal or the vertical sync signal. The
power-saver feature must be activated on your computer for this feature to work.
For instructions on setting energy-saver features (sometimes called power-management features), see
your computer documentation.
NOTE:
The energy-saver feature works only when the monitor is connected to computers that have
energy-saver features.
18
Chapter 4 Operating the Monitor
Technical Specifications on page 21
section.
ENWW

Advertisement

Table of Contents
loading

Table of Contents