Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HP L2401x
Summary of Contents for HP L2401x
- Page 1 HP L2401x and x2401 LED Backlit Monitors User Guide...
- Page 2 Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. This document contains proprietary information that is protected by copyright.
-
Page 3: About This Guide
About This Guide This guide provides information on setting up the monitor, installing the VESA adapter plate, contacting HP support, and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. - Page 4 About This Guide...
-
Page 5: Table Of Contents
Table of contents 1 Product Features ....................... 1 HP LED Backlit Monitors ......................1 2 Setting Up the Monitor ...................... 2 Extending the Monitor Stand ..................... 2 Side connectors ........................3 Connecting the Cables ......................4 Front Panel Controls ......................... 5 Adjusting the Tilt ........................ -
Page 7: Product Features
● Energy-saver feature to meet requirements for reduced power consumption ● Certifications and regulatory notices for these products are available in the HP LCD Monitors ● Reference Guide (provided on the CD included with the monitor) 100 mm VESA adapter plate ●... -
Page 8: Setting Up The Monitor
Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, and then follow the instructions below. Extending the Monitor Stand Lift the monitor from its box and place it face down on a flat surface. Grasp the stand and pull upward until fully extended. -
Page 9: Side Connectors
Side connectors Figure 2-2 Side connectors Table 2-1 Side connectors Connector Function DisplayPort Connects the DisplayPort video cable (provided with select models) from the computer to the monitor HDMI Connects the HDMI video cable (provided with select models) from the computer to the monitor DC Power Jack Connects the external power adapter to the monitor Side connectors... -
Page 10: Connecting The Cables
Connecting the Cables Place the monitor in a convenient, well-ventilated location near the computer. Figure 2-3 Connecting the monitor Connect one end of the DisplayPort signal cable (provided with select models) to the DisplayPort connector on the side of the monitor and the other end to the DisplayPort connector on the computer. -
Page 11: Front Panel Controls
Moves the OSD cursor up/increases the OSD adjustment level. If the OSD menu is on, press to select the highlighted menu item. NOTE: To view an OSD menu simulator, visit the HP Customer Self-Repair Services Media Library at http://www.hp.com/go/sml. Front Panel Controls... -
Page 12: Adjusting The Tilt
Adjusting the Tilt Tilt the monitor's panel to set it to a comfortable eye level. Figure 2-5 Tilting the monitor VESA Adapter Plate The monitor includes a VESA 100 mm x 100 mm (3.9 in x 3.9 in) adapter plate. This can be used to attach the monitor panel to a VESA-compatible device (purchased separately), such as a stand, swing arm, or other mounting fixture. -
Page 13: Safety Information
Safety Information This product has not been evaluated for connection to an “IT” power system (an AC distribution system with no direct connection to the earth, according to IEC 60950). WARNING! Always disconnect the monitor from the power source before lifting, moving, or removing the stand from your monitor. - Page 14 Remove the four screws from the monitor stand. Figure 2-7 Removing the screws from the monitor stand Save the monitor stand and the four screws, in the event that you decide to convert your monitor back to a desktop monitor in the future. Chapter 2 Setting Up the Monitor...
-
Page 15: Installing The Vesa Adapter Plate Onto The Monitor
Installing the VESA Adapter Plate onto the Monitor NOTE: This apparatus is intended to be supported by a UL or CSA Listed wall-mount bracket. Remove the stand from the monitor panel. Refer to Removing the Stand from the Monitor on page Install the VESA adapter plate that shipped with the monitor. -
Page 16: Removing The Vesa Adapter Plate
Secure the lower edge of the VESA adapter plate to the bracket hinge with four screws. Figure 2-9 Securing the VESA adapter plate To attach the monitor to a VESA-compatible device (purchased separately), follow the instructions included with that device to ensure that the monitor is safely attached. CAUTION: This monitor supports the VESA industry-standard 100 mm mounting holes. - Page 17 Remove the four screws securing the lower edge of the VESA adapter plate to the bracket hinge. Figure 2-10 Removing the screws securing the VESA adapter plate Slide the VESA adapter plate toward the lower edge of the monitor and off the bracket hinge. Figure 2-11 Removing the VESA adapter plate VESA Adapter Plate...
-
Page 18: Replacing The Stand
Replacing the Stand Align the monitor stand over the bracket hinge and secure it with the four screws. Figure 2-12 Securing the monitor stand Attach the hinge cover. Figure 2-13 Attaching the stand hinge cover Chapter 2 Setting Up the Monitor... -
Page 19: Turning On The Monitor
Image retention is a condition that may occur on all LCD screens. Monitors with a burned-in image are not covered under the HP warranty. When the monitor is powered on, the power LED on the front of the monitor is blue. -
Page 20: Finding More Information
The monitor user guide, reference guide, and drivers are available at http://www.hp.com/ support. If the information provided in the guide or in the HP LCD Monitors Reference Guide does not address your questions, you can contact support. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html. -
Page 21: Appendix A Technical Specifications
Technical Specifications NOTE: All specifications represent the typical specifications provided by HP component manufacturers; actual performance may vary either higher or lower. L2401x/x2401 Models Table A-1 L2401x/x2401 Specifications Display 60.96 cm 24 in Type MVA (Multi-domain Vertical Alignment Viewable Image Size 60.96 cm diagonal... -
Page 22: Recognizing Preset Display Resolutions
Table A-1 L2401x/x2401 Specifications (continued) Altitude: 0 to 5,000 m 0 to 16,400 ft Operating 0 to 12,192 m 0 to 40,000 ft Storage Measured Power Consumption: 28 W Full Power 23 W Typical Settings <0.5 W Sleep <0.5 W... -
Page 23: Energy-Saver Feature
Table A-2 Factory Preset Modes (continued) Preset Pixel Format Horz Freq (kHz) Vert Freq (Hz) 1680 × 1050 65.29 59.954 1920 × 1080 67.50 60.00 Energy-saver Feature The monitors support a reduced power state. The reduced power state will be entered into if the monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal.