Page 1
Instrucciones de instalación Installationsanleitung Instruções de Instalação Large Flat Panel In-Wall Swing Arm Mount Istruzioni di installazione Installatie-instructies Instructions d´installation Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description PNRIW / PNRIWU...
PNRIW / PNRIWU DISCLAIMER CSAV, Inc., and its affiliated corporations and subsidiaries (collectively, "CSAV"), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Page 3
TOOLS REQUIRED FOR INSTALLATION AND PARTS A (1) C (4) 5/16-18 x 5/8" F (16) G (4) L (4) K (1) Figure 1 PNRIW / PNRIWU (3/16") B (4) 2 short (SIDES) 2 long E (4) D (4) 5/16" 5/16"...
PNRIW / PNRIWU Installation The following procedure assumes that a Chief Model PAC501 In-Wall accessory has previously been installed following the installation instructions provided with the PAC501. If a PAC501 is not installed or there are any other questions regarding the...
Repeat steps 1 through 4 for lower arm. WARNING: SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! DO NOT route cables through holes in faceplate. PNRIW / PNRIWU A padlock or bolt may be placed through latch holes Figure 6 IMPROPER INSTALLATION CAN LEAD TO...
PNRIW / PNRIWU From Display Adjustments TENSION ADJUSTMENTS Pitch Tension Adjustment With display mounted, check for desired Pitch tension. If required, adjust the Centris Select desired Pitch tension is obtained. (See Figure 8) To lock the mount at the desired position, tighten the Pitch locking screw.
(Small adjustments of 1/8 turn or less are typically all that is required to achieve desired tension.) (See Figure 12) and (See Figure 13) DECREASE Figure 12 INCREASE Figure 13 PNRIW / PNRIWU...
Need help?
Do you have a question about the PNRIW and is the answer not in the manual?
Questions and answers