Bluetooth Module Cable - HP Pavilion DV7-1020 Maintenance And Service Manual

d. Keyboard (see
e. Speaker assembly (see
f. Display assembly (see
g. Top cover (see
Remove the TouchPad on/off button board:
1. Turn the top cover upside down, with the front toward you.
2. Release the ZIF connector to which the TouchPad button board cable (1) is attached, and then
disconnect the cable from the TouchPad board.
3. Remove the two Phillips PM2.5×4.0 screws (2) that secure the TouchPad button board to the
top cover.
4. Remove the TouchPad button board (3) and cables from the top cover.
Reverse this procedure to install the TouchPad button board.

Bluetooth module cable

NOTE: The Bluetooth module cable is included in the Cable Kit, spare part number 480474-001.
See Cable Kit on page 32
Before removing the Bluetooth module cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
88 Chapter 4 Removal and replacement procedures
Keyboard on page 68)
Speaker assembly on page
Display assembly on page
Top cover on page 82)
for more Cable Kit spare part number information.
72)
73)