HP Pavilion DV7-1020 Maintenance And Service Manual page 86

24. Remove the display hinges (2). The display hinges are available using spare part number
498136-001.
NOTE:
models equipped with BrightView display assemblies. See steps 5 through 24 for display internal
component removal information for computer models equipped with AntiGlare display assemblies.
25. If it is necessary to replace the display bezel or any of the display assembly internal components,
remove the following screw covers and screws:
(1) Two rubber screw covers on the display bezel bottom edge. The display rubber screw covers
are included in the Rubber Kit, spare part number 480442-001.
(2) Two Phillips PM2.5×6.0 screws.
26. Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
bezel until the bezel disengages from the display enclosure.
78 Chapter 4 Removal and replacement procedures
Steps 25 through 40 provide display internal component removal information for computer