20.
Disconnect the display panel cable (3) and the backlight cable (4) from the display inverter.
21.
Remove the display inverter. The display inverter is available using spare part number
480447-001.
22.
If it is necessary to replace the display hinges, remove the two Phillips PM2.5×5.0 screws (1) and
the four Phillips PM2.5×4.0 screws (2) that secure the display hinges to the display panel.
23.
Remove the eight Phillips PM2.0×4.0 screws (1) that secure the display hinges to the display panel.
Component replacement procedures
77