Speaker Assembly - HP Pavilion DV6-3033 Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly
Before removing the speaker assembly:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first disconnecting the power cord from the AC outlet
and then disconnecting the AC adapter from the computer.
4. Remove the following components:
a.
Battery on page 50
b. Hard drive cover on page 51
c.
Hard drive on page 52
d. Optical drive on page 59
e.
Keyboard on page 60
f. Top cover on page 62
g.
Touchscreen display assembly on page 67
To remove the speaker assembly:
1. Remove the three screws (1) securing the speaker assembly to the base enclosure.
2. Disconnect the speaker assembly cable (2) from the system board.
80 Chapter 4 Removal and replacement procedures
or BrightView display assembly on page 72
Spare part number
603694–001