Power Button Board - HP Pavilion DV6-3033 Maintenance And Service Manual

Power button board

Description
Power button board (includes cable)
Before removing the power button board:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first disconnecting the power cord from the AC outlet
and then disconnecting the AC adapter from the computer.
4. Remove the following components:
a. Battery on page 50
b. Hard drive cover on page 51
c. Hard drive on page 52
d.
Optical drive on page 59
e. Keyboard on page 60
f. Top cover on page 62
To remove the power button board:
1. Turn the top cover upside down with the front toward you.
2. Remove the two screws (1) that secure the power button board to the top cover.
3. Remove the power button board (2) and cable.
Spare part number
603682–001
Component replacement procedures 65