Usb Board - HP Pavilion DV6-3033 Maintenance And Service Manual

USB board

Description
USB board (includes cable)
Before removing the USB board:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first disconnecting the power cord from the AC outlet
and then disconnecting the AC adapter from the computer.
4. Remove the following components:
a.
Battery on page 50
b. Hard drive cover on page 51
c.
Hard drive on page 52
d. Optical drive on page 59
e.
Keyboard on page 60
f. Top cover on page 62
g.
Touchscreen display assembly on page 67
To remove the USB board (right-side):
1. Disconnect the USB board cable (1) from the LIF connector on the system board.
2. Remove the screws (2) that secures the USB board to the base enclosure.
82 Chapter 4 Removal and replacement procedures
or BrightView display assembly on page 72
Spare part number
603683–001