System Configuration menu
Select
Language Support
Virtualization Technology (select models only)
LAN Power Saving (select models only)
Fan Always On
Action Keys Mode
Boot Options
Diagnostics menu
Select
Primary Hard Disk Self Test
Secondary Hard Disk Self Test (select models only)
Memory Test
96
Chapter 5 Setup Utility (BIOS)
Function
Change the language of Setup Utility.
Enable/disable the processor Virtualization Technology.
Enable/disable LAN Power Saving. When enabled, saves power when
the computer is in DC mode.
Enabled/disable Fan Always On. When enabled, the computer fan is
always on.
Enable/disable the Action Keys.
POST (power-on self test)
●
for the
f10
and
f12
functions of Setup Utility in intervals of 5
seconds each (0, 5, 10, 15, 20).
HP QuickWeb—
●
Enable/disable the HP QuickWeb Boot Menu during POST.
◦
Delay to boot Windows—Set the delay for the HP QuickWeb
◦
Boot Menu to 2, 3, 5, 10, 15, or 30 seconds.
CD-ROM Boot―Enable/disable boot from CD-ROM.
●
●
Floppy Boot―Enable/disable boot from diskette.
●
Internal Network Adapter Boot―Enable/disable boot from the
internal network adapter.
Boot Order―Set the boot order for:
●
Hard Drive
◦
Internal CD/DVD ROM Drive
◦
USB Diskette on Key/USB Hard Drive
◦
USB CD/DVD ROM Drive
◦
USB Floppy
◦
◦
Network Adapter
Function
Run a comprehensive self-test on the hard drive.
Run a comprehensive self-test on a secondary hard drive.
Run a diagnostic test on the system memory.
f10
and
f12
Delay (sec.)―Set the delay