Power Supply Connection And Cut Off; Power Connection - Jolly LP-H400 User Manual

Table of Contents

The projector can be placed directly on the stage floor or rigged in any orientation on atruss without alte-

ring its operation characteristics.

For overhead use,always install a safety-rope that can hold at least 10 times the weight of the fixture.You

must only use safety-ropes with screw on carabines.Pull the safety-rope through the two apertures on the

bottom of the base and over the trussing system etc.

4.3 Power supply connection and cut off

Connect the light source to the main power source with the plug of the power cord, or cut off the power

supply:

Connection: according to procedures, the power plug and socket is inserted into

the groove one one alignment,rotation.

Cut off:according to procedures,press the button on the rotating plug,pull out.

Warning: The maximum connecting is

less than 4 pcs to make sure the normal life

time of the lighting fixture.

If you wish to change the power supply settings, see the chapter appendix Connect the fixture to the

mains with the enclosed power cable and plug.

CABLE(EU)

Brown

Light blue

Yellow/Green

Warning: it is necessary to make sure that

the installation location is perfectly appropriate,

and the installation location is safe and reliable.

CABLE(US)

Black

Live

White

Neutral

Green

Earth

- 5 -

INTERNATIONAL

Table of Contents