Cleaning The Hose Filter - Elba EBDW 1351 AW Instruction Manual

Maintenance and cleaning
4. Clean all three filters under tap water
by means of a brush.
5. Place the metal/plastic filter.
6. Place the coarse filter into the
micro filter. Make sure that it is
properly seated. Turn the coarse
filter clockwise until a "click" sound is
heard.
C
Do not use the dishwasher
without filter.
C
Incorrect placement of the
filters will reduce washing
efficiency.
Dishwasher / Instruction Manual

Cleaning the hose filter

Damages on the machine that may be
caused by impurities coming from the
urban supply water or your own water
installation (such as sand, dirt, rust, etc.)
can be prevented by means of the filter
attached to the water inlet hose. Check
the filter and the hose regularly and clean
them if necessary.
1. Turn off the tap and remove the hose.
2. After taking out the filter, clean it
under running tap water.
3. Place the cleaned filter back to its
seat in the hose.
4. Install the hose to tap.
(depends on model)
35 / 42 EN