Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
CONTENTS 1 INSTRUCTIONS FOR SAFETY AND Upper basket multipurpose service rack ........25 ENVIRONMENT Adjusting the height of the upper General safety ......4 basket ........26 Intended use ......5 Collapsible upper basket wires ..27 Children’s safety ......5 Height setting with empty basket ...27 Disposing of packaging material ..
instructions for safety and environment This section contains safety electric shock! • instructions that will help to Never touch the plug with get protected from risk of wet hands! Never unplug by personal injury or property pulling on the cable, always damage.
instructions for safety and environment Intended use Children’s safety • • This product has been Electrical products are designed for domestic use. dangerous for the children. • It must be used to do the Keep children away from the domestic type dishes only. product when it is in use.
instructions for safety and environment Transportation of the learn about these collection centers. product Compliance with RoHS If you need to move Directive the product, do it in upright position and The product you have purchased hold from the rear side. complies with EU RoHS Directive Slanting the product (2011/65/EU).
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. location To make the product ready for use, • Place the product on a solid and make sure that the electricity, tap water flat floor that has sufficient load supply and water drainage systems are carrying capacity! The product must appropriate before calling the Authorised...
Installation Permitted water temperature: up to drainage. The length of this connection 25°C must be min. 50 cm and max. 100 cm from The dishwasher may not be connected to the floor. A discharge hose longer than 4 open warm water devices or flow-through meters causes dirty washing.
Installation Aquasafe+ • The voltage and allowed fuse or breaker protection are specified in the (depends on model) “Technical specifications” section. If The Aquasafe+ system protects against the current value of the fuse or breaker water leaks that may occur at the hose in the house is less than 16 Amps, have inlet.Water contact with the valve box of a qualified electrician install a 16 Amp...
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Cleaning, rinsing and drying performance efficient manner. of your dishwasher will increase when Wipe away any coarse food remnants on water softening system is adjusted the dishes before putting them in the properly.
Page 13
Preparation Use the test strip supplied with the product according to the steps given below to determine hardness level of your supply water. Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for...
Preparation If the water hardness level adjustment 1. Firstly, take the lower basket out to is set to level 1, the “No salt warning add softening salt. indicator” will illuminate continuously 2. Turn the salt reservoir lid counter- although it is not necessary to use salt. If clockwise to open it (A).
Preparation You need to add salt right Do not put solvents into the before starting the machine. detergent dispenser. There is Thus, the overflowing the risk of explosion! salty water will be flushed Put the detergent into the detergent immediately, preventing the dispenser just before operating the risk of corrosion in machine.
Preparation Water softening salt and rinse aid must 3. Push the lid of the detergent also be used together with the detergent dispenser to close it. A "click" will be if the water hardness level is above the heard when the lid is closed. mentioned level.
Preparation 4. Make the appropriate rinse aid 3. Slightly press the point (B) of the settings. reservoir lid to close it. Rinse aid The rinse aid used in dishwashers is a special combination that aims to increase drying efficiency and prevent water or lime stains on the washed items.
Preparation Decorative prints of chinaware To prevent possible injuries, as well as aluminium and silver always place the sharp and items may get discoloured or pointed dishes such as service tarnished after washing in the fork, bread knife, etc. upside dishwasher just as it happens down so as their pointed ends in handwashing as well.
Page 19
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware Dishwasher / Instruction Manual 19 / 42 EN...
Preparation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in dishes such as knife, fork, spoon, etc. in an efficient manner.
Preparation Collapsible lower basket tines Bringing the tines to the horizontal position by holding (depends on model) them from the tips may cause There are foldable tines (A) located at them to bend. Therefore, it the lower basket of the machine are will be appropriate to bring designed for an easier placement of large the tines in the middle to...
Preparation Collapsible lower basket tines Bringing the tines to the horizontal position by holding (depends on model) them from the tips may cause There are foldable tines (A) located at them to bend. Therefore, it the lower basket of the machine are will be appropriate to bring designed for an easier placement of large the tines in the middle to...
Preparation SoftTouch Accessory Tray Wash Supports (depends on model) (depends on model) The SoftTouch Accessory found in the Use the supports to wash trays in the lower basket of your machine enables a bottom basket. safe washing for your fragile glasses. See the Auxiliary functions section for appropriate programme and function selection.
Preparation Lower basket multipurpose / Make sure that the impeller height adjustable service rack does not touch the dishes you (depends on model) placed on the racks. This accessory located at the lower basket To close the racks: of your machine allows you to easily wash 1.
Preparation Lower basket bottle wire Upper basket multipurpose service rack (depends on model) The bottle wire is designed for easier (depends on model) washing of long pieces with wide mouths. This accessory located at the upper basket You may take out the bottle wire from the of your machine allows you to easily wash basket when not in use by pulling it out pieces such as extra long ladles and bread...
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket 1. Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B).
Preparation Collapsible upper basket wires Height setting with empty basket (depends on model) You can use collapsible wires when you (depends on model) need a larger space for your dishes in the In this model, the height setting of the upper basket of your machine.
Preparation Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc.
5 5 5 Operating the product On/Off/Programme Selection key Rinse Aid indicator Salt indicator On/Off Control light Handle Programme Follow-up lights Start/Pause/Cancel key Half Load function Keys into the detergent compartment. 5. Check if the Salt and Rinse Aid On/Off/Programme Selection key indicators light and add salt and/or When you use the On/Off/Programme rinse aid if needed.
Page 30
Operating the product /42 EN Dishwasher / Instruction Manual...
Operating the product Auxiliary functions Starting the programme Washing programmes of your dishwasher To start your machine after selecting the are designed to obtain the best cleaning programme and auxiliary functions, press effect, considering the type of the soiling, Start/Pause/Cancel key. soiling degree and properties of the dishes Your machine performs water to be washed.
Operating the product Programme follow-up Salt indicator You can track the current step of the Please check the salt indicator to see selected programme on the programme whether there is adequate amount of step lights located on the control panel. softening salt in the dishwasher or not.
Operating the product 5. When you set the Programme Selection Knob to the “Off” position again, the machine will enter the normal mode. Position of Rinse Aid program Rinse Aid Adjustment Amount selection Indicator knob 1 dose of Washing lamp rinse aid is on the panel will dispensed.
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn Check if food residues are left on the off the tap before attempting filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a Check if the holes on the upper impeller week in order for the machine operates (1) are clogged. If they are clogged, efficiently. remove and clean the impeller. Turn its nut to left to remove the upper impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 38
Troubleshooting Dishes are not dry at the end of cycle • Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no water will accumulate in them. • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary.
Page 39
Troubleshooting • Water hardness setting is low or salt level is insufficient >>> Measure the hardness of the supply water appropriately and check the water hardness setting. • Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while adding salt.
Page 40
Troubleshooting for purposes such as opening cans. Do not use metal kitchen utensils out of their intended uses. • Cutlery are made of low quality stainless steel. >>> Corrosion on such items is inevitable; they should not be washed in dishwashers. •...
Page 41
Troubleshooting • Dishes are not placed orderly in the machine. >>> When placing the glasses and other glassware into the basket lean them not against other dishes but the edges or racks of the basket or the glass support tines. Striking of the glasses to each other or to other dishes due to the impact of water during washing can cause breaks, or scratches on their surfaces.
Need help?
Do you have a question about the EBDW 1351 AW and is the answer not in the manual?
Questions and answers