Table of Contents
Advertisement
PRECAUTIONS
Notice
Indicates points that you must observe in order to
prevent product failure, damage or malfunction and
data loss.
Power supply
• If not using the unit for a long period of time, be sure
to pull the power plug from the outlet. Even if this unit
is turned off by [z](Standby/On), a minute current is
still flowing.
Installation
• Do not use this unit in a location that is exposed to
direct sunlight that becomes extremely hot, such as
near a heater, or extremely cold, or that is subject to
excessive dust or vibration. Failure to observe this
may cause the unit's panel to become deformed, the
internal components to malfunction, or for operation
to become unstable.
• If using a wireless function, avoid installing this unit
near metal walls or desks, microwave ovens, or other
wireless network devices.
Obstructions could shorten the transmission
distance.
Connections
• Do not connect this product to public Wi-Fi and/or
Internet directly. Only connect this product to the
Internet through a router with strong password-
protections. Consult your router manufacturer for
information on security best practices.
• If connecting external units, be sure to thoroughly
read the manual for each unit and connect them in
accordance with the instructions.
Failure to properly handle a unit in accordance with
the instructions could cause malfunctions.
• Do not connect this unit to industrial units.
This unit has been designed to connect to a
consumer-use unit. Connection to an industrial unit
could cause this unit to malfunction.
Handling
• Do not place vinyl, plastic, or rubber products on this
unit. Failure to observe this may cause discoloration
or deformation in the panel of this unit.
• If the ambient temperature changes drastically (such
as during unit transportation or under rapid heating
or cooling) and there is a chance condensation may
have formed in the unit, leave the unit for several
hours without turning on the power until it is
completely dry before use. Using the unit while there
is condensation can cause malfunctions.
8
Safety Brochure
EN
Maintenance
• When cleaning the unit, use a dry, soft cloth. Using
chemicals such as benzine or thinner, cleaning
agents, or chemical scrubbing cloths can cause
discoloration or deformation.
About disposal
• Be sure to discard used batteries in accordance with
local regulations.
Advertisement
Table of Contents
