Table of Contents
Advertisement
CONFIGURATIONS > Configuring various functions (Setup menu)
Setting the use of each speaker and its size
Selects the setting according to the use and size of your speakers.
Setup menu
"Speaker" > "Configuration" > (speaker)
Settings
Small
Large
None
NOTE
The speaker size of the front speakers is automatically set to "Large" when both "Subwoofer 1" and "Subwoofer 2" in the "Setup"
(
menu are set to "None".
Be sure to connect the front left and right speakers.
(
Related links
"Setting the crossover frequency of the low-frequency components" (p.230)
(
"Setting the use of a subwoofer" (p.231)
(
"Basic operation of the Setup menu" (p.213)
(
n
When no speaker in a speaker type is connected
"Configuration" of the speaker type, in which no speaker is connected, in the "Speaker" is set to "None". The
other speakers will produce its channel audio.
Center channel audio
(
The front speakers will produce center channel audio.
Surround channel audio
(
The front speakers will produce surround channel audio. Virtual CINEMA DSP works in this case.
Surround back channel audio
(
The surround speakers and subwoofer (or front speakers) will produce surround back channel audio.
Presence channel audio
(
The surround speakers and subwoofer (or front speakers) will produce presence channel audio.
Small speakers. As a general guideline, the woofer diameter is smaller than 16 cm (6.1/4").
The subwoofer will produce low-frequency components (configurable in "Crossover").
Large speakers. As a general guideline, the woofer diameter is larger than 16 cm (6.1/4").
The speaker will produce all of the frequency components.
No speaker is connected.
Channel audio of the speaker set to "None" will be produced from the other speakers.
226
Advertisement
Table of Contents
