Table of Contents
Advertisement
TROUBLESHOOTING > When any problem appears
Video trouble
No video
(
Another input source is selected on the unit.
Select an appropriate input source with the input selection keys.
(
Another input source is selected on the TV.
Switch the TV input to display the video from the unit.
(
The video signal output from the unit is not supported by the TV.
Check the video output setting of the playback device. For information about video signals supported by
the TV, refer to the instruction manuals for the TV.
(
The cable connecting the unit and TV (or playback device) is broken.
If there is no problem with the connection, replace with another cable.
(
An incorrect HDMI OUT jack is selected on the unit.
Press HDMI OUT on the remote control to select the HDMI OUT jack to be used for signal output. For
details, see the following:
"Selecting an HDMI output jack" (p.151)
(
375
Advertisement
Table of Contents
