Table of Contents
Advertisement
CONFIGURATIONS > Configuring various functions (Setup menu)
Switching the output level for electronic signal transmission
manually
Switches the output level for electronic signal transmission manually when "Trigger Mode" is set to
"Manual". This setting can be used to confirm proper function of the external device connected via the
TRIGGER OUT jack.
Setup menu
"System" > "Trigger Output1"/"Trigger Output2" > "Trigger Mode" > "Manual"
Settings
Low
High
Related links
"Basic operation of the Setup menu" (p.213)
Stops the electronic signal transmission.
Transmits 12 volts of electronic signal.
326
Advertisement
Table of Contents
