Yamaha AVENTAGE RX-A6A User Manual page 236

CONFIGURATIONS > Configuring various functions (Setup menu)
Setting the equalizer
Selects the type of equalizer to adjust the tone.
Setup menu
"Speaker" > "Parametric EQ"
Settings
Manual
YPAO:Flat
YPAO:Front
YPAO:Natural
YPAO:Low Frequency
Through
NOTE
Select "YPAO:Flat", "YPAO:Front", "YPAO:Natural" or "YPAO:Low Frequency" and press ENTER again to view the results of adjusting
the tone. These functions are available only when the YPAO measurement results have already been saved.
Related links
"Flow of the speaker configurations" (p.115)
(
"Basic operation of the Setup menu" (p.213)
(
n
Adjusting the equalizer manually
You can adjust the equalizer manually. First, "Parametric EQ" in "Speaker" is set to "Manual".
Setting range
Center frequency
Q factor
Gain
1
Select "Manual".
2
Press ENTER again to enter the edit screen.
3
Select a speaker.
Adjusts the equalizer manually.
Adjusts each speaker to achieve the same characteristics.
Adjusts each speaker to achieve the same characteristics as the front speakers.
Adjusts each speaker to achieve the same characteristics with lowered high frequency range.
Adjusts each speaker to compensate only low frequency range.
Does not use the equalizer.
15.6 Hz to 16.0 kHz (15.6 Hz to 250.0 Hz for subwoofer)
0.500 to 10.080
-20.0 dB to +6.0 dB
236