enphase Q 7 Micro Installation And Operation Manual page 33

Standard warranty term
Compliance
Grounding
Monitoring
Communication
Integrated DC disconnect
Integrated AC disconnect
33
Enphase IQ7-60-2-US Microinverter Parameters
enphase.com/warranty
CA Rule 21 (UL 1741-SA) UL 62109-1, UL1741/IEEE1547,
FCC Part 15 Class B, ICES-0003 Class B, CAN/CSA-C22.2
NO. 107.1-01
This product is UL Listed as PV Rapid Shut Down
Equipment and conforms with NEC-2014 and NEC-2017
section 690.12 and C22.1-2015 Rule 64-218 Rapid
Shutdown of PV Systems, for AC and DC conductors, when
installed according manufacturer's instructions.
The DC circuit meets the requirements for ungrounded PV
arrays in NEC. Ground fault protection (GFP) is integrated
into the class II double insulated microinverter.
Enlighten Manager and MyEnlighten monitoring options
require an Enphase IQ Envoy
Power line
The DC connector has been evaluated and approved for
use as the load-break disconnect required by NEC 690.
The AC connector has been evaluated and approved for
use as the load-break disconnect required by NEC 690.
© 2018 Enphase Energy Inc. All rights reserved.
IQ 7 / IQ 7+ / IQ 7X Micro Installation and Operation
141-00043-02