enphase Q 7 Micro Installation And Operation Manual page 32

High AC voltage trip limit accuracy
Low AC voltage trip limit accuracy
Frequency trip limit accuracy
Trip time accuracy
Overvoltage class AC port
AC port backfeed under single fault
Power factor setting
3
Maximum microinverters per 20A (max) AC branch circuit
240 VAC (single phase)
208 VAC (single phase)
CEC weighted efficiency
240 VAC (single phase)
208 VAC (single phase)
Static MPPT efficiency (weighted, ref EN 50530)
Total harmonic distortion
Ambient temperature range
Night tare loss
Storage temperature range
Compatibility
Dimensions not including mounting bracket
Connector type
Weight
Environmental category / UV exposure rating
Torque specifications for fasteners
(Do not over torque)
Cooling
Relative humidity range
Approved for wet locations
Pollution degree
3
Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area.
.
32
Enphase IQ7-60-2-US Microinverter Parameters
Miscellaneous Parameters
Features and Specifications
Pairs with most 60-cell PV modules (the PV module DC
conductors must be labeled "PV Wire" or "PV Cable" to be
compliant with NEC for Ungrounded PV Power Systems)
212 mm x 175 mm x 30.2 mm (approximate)
MC-4 (or Amphenol H4 UTX with additional Q-DCC-5
adaptor)
1.08 kg (2.38 lbs.)
NEMA type 6 / outdoor
•
•
•
Natural convection - no fans
4% to 100% condensing
Yes
PD3
© 2018 Enphase Energy Inc. All rights reserved.
IQ 7 / IQ 7+ / IQ 7X Micro Installation and Operation
mVrms
mVrms 179
% ±0.1
milliseconds ±33
A
%
%
%
C
-40
mW
C
-40
6 mm (1/4") mounting hardware: 5 N m (45 to 50 in-
lbs.)
8 mm (5/16") mounting hardware: 9 N m (80 to 85 in-
lbs.)
When using UL 2703 mounting hardware, use the
manufacturer's recommended torque value
280
III
0
1.0
16
13
97.0
97.0
99.5
5
+65
50
+85
141-00043-02