Compaq Evo N150 Maintenance And Service Manual page 100

Removal and Replacement Procedures
3. Peel back the shielding tape that covers the right PC Card
screw
4. Remove the two silver M2 × 5.0 screws
PC Card assembly to the system board.
5. Turn the system board top side up with the PC Card slot
opening facing you.
6. Lift up the back edge of the PC Card assembly to disconnect
it from the system board
7. Remove the PC Card assembly.
Figure 5-23. Removing the PC Card Assembly
Reverse the above procedure to install the PC Card assembly.
5–34
(Figure 5-23).


.

Maintenance and Service Guide
that secure the