Compaq Evo N150 Maintenance And Service Manual page 73

3. Remove the two pewter M2.5 × 7.0 screws
keyboard to the top cover (Figure 5-4).
4. Lift up the back edge of the keyboard and swing it up and
forward
5. Release the zero insertion force (ZIF) connector
the keyboard cable is connected and disconnect the keyboard
cable
Figure 5-4. Removing the Keyboard
6. Remove the keyboard.
Reverse the above procedure to install the keyboard.
Maintenance and Service Guide
until it rests on the top cover.

.

Removal and Replacement Procedures
that secure the


to which

5–7