Compaq Evo N150 Maintenance And Service Manual page 75

Hp evo n150: supplementary guide
Hide thumbs Also See for Evo N150:
Table of Contents

Advertisement

Removal and Replacement Procedures
5. Remove the display.
T o ensure proper alignment of the display during replacement,

loosely install the screws in the
,
,
,
sequence indicated in




Figure 5-6. Tighten the screws after all four have been been
loosely installed.
After tightening the display screws, tuck the display cable into the
slot
in the base enclosure.

Figure 5-6. Installing the Display Screws
Reverse the above procedure to install the display.
Maintenance and Service Guide
5–9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Evo n150 series

Table of Contents