Compaq Evo N150 Maintenance And Service Manual page 96

Removal and Replacement Procedures
4. Position the base enclosure so the front faces you.
5. Remove the following screws, as illustrated in Figure 5-20:




Figure 5-20. Removing the System Board Screws
5–30
two black M2 × 14.5 screws
assembly to the base enclosure
black M2.5 × 4.5 screw
secures the system board to the base enclosure
black M2.5 × 4.0 screw
connector/cable to the base enclosure
black M2 × 4.0 screw
secures the system board to the base enclosure
that secure the PC Card


near the USB connector that

that secures the modem

near the display connector that

Maintenance and Service Guide