Compaq Evo N150 Maintenance And Service Manual page 93

2. Disconnect the infrared board cable
(Figure 5-18).
3. Remove the infrared board cable from the metal clip
through which it is routed.
4. Remove the black M2 × 4.0 screw
board to the base enclosure.
5. Lift the infrared board
Figure 5-18. Removing the Infrared Board
Reverse the above procedure to install the infrared board.
Maintenance and Service Guide
Removal and Replacement Procedures


that secures the infrared

out of the base enclosure.

from the system board

5–27