Removal and Replacement Procedures
5.7 Display
14.1-inch, XGA, CTFT display
When the display screws are removed, the display assembly is
unsupported. Make sure to provide support for the display
assembly when removing the display screws.
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the hinge covers (Section 5.5).
3. Disconnect the display cable
(Figure 5-5).
4. Remove the four silver M2.5 × 8.0 screws
display to the base enclosure.
Figure 5-5. Removing the Display
5–8
Display
Spare Part Number Information
from the system board
Maintenance and Service Guide
239029-001
that secure the