4-12 Optional Drives
The SC846 chassis supports optional additional drives. For each Position A and B,
the user may install one of the choices listed in the following table.
Position
Position A
Position B
Fixed Internal Hard Drives
For 3.5" drives, use the mounting tray, MCP-220-84601-0N. For fixed 2.5" drives,
use the mounting tray, MCP-220-00051-0N, and attach to MCP-220-84601-0N.
Note: SC846B does not support 3.5" HDD tray in position B.
Installing the Fixed Hard Drive
1. Power down the system as described in section 4-2 and remove the chassis
cover.
SC846B Models
One fixed 3.5" HDD
Two fixed 2.5" HDDs
Two hot-swap 2.5" HDDs
One fixed 2.5" HDD
One DVD drive
A
B
Figure 4-22. Drive Location Options
Chapter 4: Chassis Setup and Maintenance
Non "B" Models
One fixed 3.5" HDD
Two fixed 2.5" HDDs
One fixed 3.5" HDD
One fixed 2.5" HDD
One DVD drive
4-19