Table of Contents
Advertisement
SC846 Chassis Manual
4-8
Checking the Airflow
Checking the Airflow
•
Make sure there are no objects to obstruct airflow in and out of the server.
•
Do not operate the server without drives or drive carriers in the drive bays. Use
only recommended server parts.
•
Make sure no wires or foreign objects obstruct air flow through the chassis. Pull
all excess cabling out of the airflow path or use shorter cables.
The control panel LEDs inform you of system status. See "Chapter 3: System
Interface" for details on the LEDs and the control panel buttons.
In most cases, the chassis power supply and fans are pre-installed. If you need to
install fans continue to the System Fan section of this chapter. If the chassis will be
installed into a rack, continue to the next chapter for rack installation instructions
4-12
Advertisement
Table of Contents
