Table of Contents
Advertisement
Figure 5-4. Installing the Chassis into a Rack
Note: Figures are for illustrative purposes only. Always install servers into racks
from the bottom up.
Installing the Chassis into a Rack
Installing the Chassis into a Rack:
1. Align the chassis rails (A) with the front of the rack rails (B).
2. Slide the chassis rails into the rack rails, keeping the pressure even on both
both sides. You may have to depress the locking tabs while inserting. When
the server has been pushed completely into the rack, the locking tabs should
"click" into the locked position.
3. If screws are used, tighten the screws on the front and rear of the outer rails.
4. (Optional) Insert and tighten the thumbscrews that hold the front of the server
to the rack.
1
A
5-7
Chapter 5: Rack Intallation
1
B
Advertisement
Table of Contents
