Table of Contents
Advertisement
SC846 Chassis Manual
5-4
Procedure for Rack Mounting
This section provides information on installing a 4U chassis into a rack unit with
the rails provided. There are a variety of rack units on the market, so the assembly
procedure may differ slightly. Also refer to the installation instructions for your rack
unit.
Note: This rail will fit a rack between 26.5"and 36.4" deep.
Identifying the Inner Rack Rails
The chassis package includes one pair of rack rail assemblies in the rack mounting
kit. Each assembly consists of an inner rail that secures to the chassis and an outer
rail that is attached directly to the rack. The inner rails are etched with "L" (Left
side) and "R" (Right side).
Figure 5-1. Identifying the Rack Rails
5-4
Inner Rail Assembly
Advertisement
Table of Contents
