Table of Contents
Advertisement
Chapter 4: Chassis Setup and Maintenance
Chapter 4
Chassis Setup and Maintenance
4-1
Overview
This chapter covers the steps required to install components and perform
maintenance on the chassis. The only tool required is a Phillips screwdriver.
Review the warnings and precautions listed in the manual before setting up or
servicing this chassis. These include information in Chapter 2: Warning Statements
for AC Systems and the warning/precautions listed in the setup instructions.
For SC846B model chassis, such as SC846BE1C-R1K28B allow the installation of
optional hard drives accessable from the rear of the chassis.
Figure 4-1. Front View
Figure 4-2. Rear View (SC846B Model shown)
4-1
Advertisement
Table of Contents
