Table of Contents
Advertisement
4-7
Installing the Air Shroud
Figure 4-13. Air Shroud for SC846LP Chassis
Air shrouds concentrate airflow to maximize fan efficiency. The SC846 chassis air
shroud does not require screws to set up.
Installing the Air Shroud
1. Power down the system as described in section 4-2 and remove the cover as
described in Section 4-1.
2. Confirm that your air shroud matches your chassis model. Each shroud is labeled
SC846LP, SC846RC, or SC846U.
3. Disconnect the power supply, lay the chassis on a flat surface, and open the
chassis cover.
4. Place air shroud in the chassis. The air shroud fits behind the two fans closest
to the power supply.
Chapter 4: Chassis Setup and Maintenance
4-11
Advertisement
Table of Contents
