Table of Contents
Advertisement
Quick Links
I
ntroduction
Adds one 9-pin RS-232 serial port to USB-equipped
computer systems.
Key Features and Benefits
•
Provides one 9-pin (DB9) RS-232 port
•
Supports data transfer rate up to 500kb/s
•
USB plug-n-play and bus-powered
•
Connectors: USB Type A (male); 9-pin
RS-232 serial (male)
Serial Number Sticker
For future product return or exchange, this serial
number is required. Please keep it for your
reference.
04-0692B
USB to Serial Adapter Cable
Quick Installation Guide
Serial Number
Part Number
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SIIG JU-CS0111-S1
Summary of Contents for SIIG JU-CS0111-S1
- Page 1 USB to Serial Adapter Cable Quick Installation Guide ntroduction Adds one 9-pin RS-232 serial port to USB-equipped computer systems. Key Features and Benefits • Provides one 9-pin (DB9) RS-232 port • Supports data transfer rate up to 500kb/s • USB plug-n-play and bus-powered •...
- Page 2 System Requirements • USB equipped computer with an available USB port • Windows 8 (32-/64-bit) / 7 (32-/64-bit) / ® Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 (32-/64-bit) / Server 2008 (32-/64- bit) / Server 2008 R2 / 2000 Package Contents •...
- Page 3 Windows Installation Make sure the driver is installed before plugging the USB to Serial Adapter Cable into the computer. Do Not plug the USB to Serial Adapter Cable into the computer until instructed to do so. Windows 8 (32-/64-bit) / 7 (32-/64-bit) / Server 2008 R2 At the Windows desktop insert the driver CD.
- Page 4 Windows Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000 At the Windows desktop insert the driver At the CD autoplay window: Double click the setup file in the driver CD. If the CD autoplay window does not start: Click Start, and Run, type D:\setup.exe, then press Enter.
- Page 5 To Verify Windows Installation Check Device Manager verify installation. For Windows 8 / 7: Right click Computer, click Manage, then click Device Manager. For Windows Vista: Right click Computer, click Manage, click Continue, then click Device Manager. For Server 2008 / 2008 R2: Right click Computer, click Manage, double click Diagnostics, then click Device Manager.
- Page 6 Blank Page...
- Page 7 Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued.
- Page 8 Fremont, CA 94538-3152, USA Phone: 510-657-8688 USB to Serial Adapter Cable is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the JU-CS0111-S1 and is the answer not in the manual?
Questions and answers